+91 79 2640 5563
PEB
Secondary Member

Secondary members are load-carrying members suitable to ensure the stability of the building against forces from all directions. These include:

Purlins, Girts and Eave Struts

Purlins, Girts and Eave Struts are secondary structural members used to support the wall and roof panels. Purlins are used on the roof; Girts are used on the walls and Eave Struts are used at the intersection of the sidewall and the roof.

Secondary members have two functions : they act as struts that help in resisting part of the longitudinal loads that are applied on the building such as wind and earthquake loads and they provide lateral bracing to the compression flanges of the main frame members thereby increasing frame capacity.

Z- Purlin & C- Purlin

Purlins and Girts are structural members made up of cold formed steel Z & C sections that are supported on columns, rafters or building walls. They can be lapped and nested at the supports, to create a continuous beam configuration. They are placed under the roof, wall and the perimeter of the building and serve as supports to the roof sheeting and wall cladding.

The Phenix Edge

  • Offers large column spacing.
  • Are corrosion resistant due to rigorous surface preparation and
    superior on-line painting.
  • Are practically maintenance free as they are pre-galvanized.
Phenix-Zees
Depth Thickness Available In Black
165 to 292 mm 1.5 to 3 mm 180 GSM and 275 GSM
Phenix-Cees
Depth Thickness Available In Black
165 to 250 mm 1.5 to 3 mm 180 GSM and 275 GSM
Function

Eave Struts are typically constructed from cold formed 'C' sections and are rolled to suit the roof slope. Their primary function is to support the gutters and also to act as a junction of the roof and the wall cladding.

The Phenix Edge
  • Phenix Eave Struts offer large column spacing.
  • Are corrosion resistant due to rigorous surface preparation and superior on-line painting.
  • And practically maintenance free as they are pre-galvanized.
Function

These are long span, load-carrying members suitable for direct support of the floors and roof decks in buildings.

The Phenix Edge
  • Offer large column spacing.
Function

This member is designed to ensure the stability of the building against forces in the longitudinal direction due to wind, cranes and earthquakes.

The Phenix Edge
  • Can accommodate any length.
  • Painted or Pre-Galvanized.